Liquid Silicone Injection has made the process of customization much easier compared to Gum-Stock Silicone. Because liquid silicone is injected into two part molding system, customization is simple. Insert molding is achieved by having two molds, one mold to make the inserts such as colored keys, clear windows, or light pipes. Once the inserts are molded, they are placed into the keypad mold.
http://www.silimtec.com/basic-siloxane-polymer/
HDMI cables are an updated version of DVI. HDMI cables were also designed for use with HD components, but their connector is much slimmer, like a large USB cable. HDMI also includes HDCP copy protection. Manufacturers of HDMI cables tend to advertise their product as the only choice for connecting HD video components, but that's not true. DVI cables work equally well. However, if you're using an analog TV, all three work equally well [source: Cobalt Cable].
http://www.shusb.com/radio-con....trol-models-connecti
A car's engine creates power through the combustion of air and fuel. In most modern, fuel-injected systems, the air and fuel mix together inside of the component known as the intake manifold. One end of the manifold consists of a single tube through which fresh air flows. The other end consists of multiple smaller tubes, each of which connect to one of your engine's cylinders.
Between the intake manifold and the engine block sits the intake manifold gasket.
http://www.sharonparts.com/int....ake-manifold/ford-in
A mold is a cavity in a material that receives liquid metal and produces a cooled object in the shape of that cavity. Molds can be simple. The forms used to create ingots of metal are like loaf pans, with the metal simply poured inside and left to cool. Most molds are for more complex shapes and are based on a pattern. The pattern imprinted into a split mold. Half of the pattern is imprinted on one side of the mold and half on the other, and then the halves are clamped together before the mold is filled.
http://www.kegao-precision.com..../connector-mould-par
Typically, when you buy a sink you will find that you have the inset bowl as well as a lip lining the edge or outline. For top-mount sinks, if you drop them into a cutout hole within a benchtop, the lip will save the sink from falling straight through and clanging onto the ground. Hence, top-mount sinks are also commonly referred to as drop-in sinks. You may also hear them being called overmount sinks and rimmed sinks for the similar reasons.
http://www.jrmtsinks.com/topmo....unt-sink/single-bowl
Traditional air compressors are fixed speed, meaning they run at a constant and consistent speed. This produces a fixed amount of compressed air per minute. There are many benefits to fixed speed compressor technology if your compressed air demand is constant and unchanging. However, this isn’t always the case. As fixed speed compressors are always operating at full-throttle, if all of the output is not required then energy is being wasted.
http://www.fscooling.com/compr....essor/dc-variable-sp
Luxury vinyl planks are made of compressed layers of vinyl, with a high resolution image overlaid onto them, to mimic the look of another material. Planks are generally used to mimic hardwood, because the shape is similar to real wood planks. The high res image allows vinyl to look like virtually any other material, though, such as stone, tile, and more. LVP has several layers, but the main one is its vinyl core, which makes the planks durable but flexible.
http://www.beprospcfloor.com/spc-floorings/
If an environment is extremely noisy, a cable may use multiple layers of shielding with both the braided and foil designs. Sometimes pairs of wires are shielded individually in addition to the entire cable being shielded. This is done to prevent crosstalk between pairs.
Unlikely competitor for diamond as best thermal conductor: Boron arsenide potential for cooling applications
http://www.avanzados.net/therm....ally-conductive-mate
