According to the type of goods, the tray by the quality of the goods and the size of the tray, reasonably determine the goods packed in the tray. The pallet utilization rate of the bearing surface area should be no less than 80% in general. For the collapsible bulk container pallet pattern has the following requirements:
A, wood, paper and metal containers, hard straight side goods single layer or multi-layer alternating colors, stretch or shrink film packaging;
B, paper or single cargo multi-layer fiber class goods packed, with strapping tape sealing of a cross.
C, sealed metal containers such as cylinder single layer or multi-layer palletising goods, wooden cover.
D, should be moistureproof, waterproof protection such as paper collapsible pallet box products, textile goods single layer or multilayer alternating colors, stretch or shrink film packaging goods increase Angle support, cargo cover plate and reinforcement structure; Fragile goods class single or multi-layer pattern, increase the wooden support
Board structure
E, metal bottle type of single vertical cylinder container or goods packed, increasing cargo box and slat reinforcement structure;
F, bag of multi-layers staggered compaction packed goods.
The role of plastic tray by gathering plastic tray
1, the selection of single or double plastic tray, plastic tray tray should be based on foldable bulk container corresponding storage, loading and unloading handling equipment and state (such as libraries, the types of shelves, stacking or place state, etc.) to determine. To cover an area of an area small automatic three-dimensional library and high quality Frame, mainly stacker or electric lift trucks in the vertical transport of occasions, one shelf series tray and double shelves series tray can choose.
2, if in the three-dimensional library or shelf load up to 1 t, and shelf no ceiling, suggested that steel tube with built-in shelf tray. Built-in pipe steel-plastic structure tray effectively solved the greater the deadweight shelves product weight, the cost is high Old problem, more important is the use of square steel tube wall thickness is about 2 mm rigidity, reached the shelves (three-dimensional library) of horizontal and vertical deflection are 10 mm or less strict requirements, at plastic bulk containers the same time reduce the permanent deformation and reduce the cost.
3, for covering an area of big and predominantly horizontal transportation situation, if use manual hydraulic pallet truck carrying suited to choose single pallets. Stacking goods, if necessary to the bottom of the tray above and below the goods collocated, with double-sided plastic tray or field Type words at the end of the single tray is better. If use can motor pallet truck is suitable for handling with nine article not connected at the bottom of foot type single pallets.